X-TREME Shock Absorber KTM 690 Enduro R 2019-2026, TracTive
The TracTive X-TREME is a high-quality, fully adjustable shock absorber featuring an external reservoir and PDSII bottoming-out protection.
The damping setup has been specially developed for the KTM 690 Enduro R. Rebound and compression damping can be adjusted independently. The compression stage also features separate high- and low-speed adjustment.
The external reservoir provides a larger oil volume and better heat dissipation. As a result, damping performance remains as consistent as possible even under high loads, such as on long off-road stages.
The shock absorber is available as an X-TREME + HPA version with hydraulic spring preload adjustment via a handwheel.
Adjustment Options
- Rebound: approx. 18 clicks
- Low-speed compression: adjustment of damping for slow compression movements, such as when accelerating or on long undulating bumps
- High-speed compression: adjustment of damping for fast compression movements, such as potholes or harsh terrain edges
- Spring preload: mechanical on the shock absorber
Technical Details
- 46 mm piston diameter
- 16 mm piston rod made of hardened 42CrMo steel
- Aluminum housing
- External, fixed-mount reservoir
- PDSII bottoming-out protection
- Fully serviceable and individually tunable
PDSII Bottoming-out Protection
The PDSII system works with an additional piston that creates progressive damping towards the end of the suspension travel. This reduces harsh bottoming-out during heavy impacts or jumps.
Available Heights
The shock absorber is available in three different versions:
- Standard height
- 25 mm lowering
- 25 mm raising
For the lowered version, an adjustment of the side and center stand may be necessary.
Individual Setup
We adjust the shock absorber to your rider weight and intended use before delivery.
For this, we only need your rider weight including motorcycle gear and a brief note on the primary area of use (road, touring, off-road, etc.).
You can simply send this information to us via email or reply directly to your order confirmation.
As standard, the shock absorber is supplied with a 75 N/mm spring. Depending on rider weight and intended use, softer or harder springs are also available.
- Product line
- X-TREME
- Installation position
- rear
- Adjustable
- rebound (approx. 18 clicks), high-speed and low-speed compression
- Damping system
- oil and gas separated, with external reservoir
- Bottom-out protection
- PDSII
- Piston diameter
- 46 mm
- Piston rod
- 16 mm
- Spring preload
- mechanical
- Spring
- linear
- Spring rate ex works
- 75 N/mm
- Rebound (Rebound Position)
- 12 (270°)
- High-speed compression (High Speed Compression Position)
- 10
- Low-speed compression (Low Speed Compression Position)
- 12
- Spring preload (Preload Spring)
- 16 mm
- X-TREME shock absorber with spring
KTM
No model found. This product does not fit the model you searched for.