X-TREME Shock Absorber + HPA KTM 790 Adventure 2019-2025, TracTive
The TracTive X-TREME is a high-quality, fully adjustable shock absorber with an external reservoir, hydraulic preload adjuster (HPA), and PDSII bottoming control.
The damping setup has been specially developed for the KTM 790 Adventure. Rebound and compression damping can be adjusted independently of each other. The compression damping additionally features separate high- and low-speed adjustment.
The external reservoir provides a larger oil volume and better heat dissipation. This ensures that damping performance remains as consistent as possible even under high loads, such as during long off-road stages.
The hydraulic preload adjuster's handwheel allows the shock to be quickly adapted to different load conditions without the need for tools.
Adjustment Options
- Rebound: approx. 18 clicks
- Low-speed compression: adjustment of damping during slow compression movements, such as when accelerating or on long undulations
- High-speed compression: adjustment of damping during fast compression movements, such as hitting potholes or hard terrain edges
- Spring preload: hydraulic via handwheel, more than 60 clicks
Technical Details
- 46 mm piston diameter
- 16 mm piston rod made of hardened 42CrMo steel
- Aluminum housing
- External, fixed-mount reservoir
- PDSII bottoming control
- Hydraulic Preload Adjuster (HPA)
- Fully serviceable and individually tunable
PDSII Bottoming Control
The PDSII system works with an additional piston that generates progressive damping towards the end of the stroke. This reduces harsh bottoming out during heavy impacts or jumps.
Available Heights
The shock absorber is available in four different versions:
- Standard height
- 25 mm lowering
- 15 mm raising
- 40 mm raising
With the lowered version, an adjustment of the side and center stand may be necessary.
We recommend matching the suspension height on the front and rear wheels. Ideally, the shock absorber should be combined with an appropriately matched fork cartridge.
Individual Setup
We tune the shock absorber to your rider weight and intended use before delivery.
For this, we only need your rider weight including motorcycle gear and a brief note on your primary area of use (road, touring, off-road, etc.).
You can simply send us this information via email or reply directly to your order confirmation.
The shock absorber is supplied as standard with a 110 N/mm spring. Depending on rider weight and intended use, softer or harder springs are also available.
- Product line
- X-TREME
- Installation position
- rear
- Adjustable
- Rebound (approx. 18 clicks), high-speed and low-speed compression
- Damping system
- Oil and gas separated, with external reservoir
- Bottoming control
- PDSII
- Piston diameter
- 46 mm
- Piston rod
- 16 mm
- Spring preload
- hydraulic, with handwheel (more than 60 clicks)
- Spring
- linear
- Factory spring rate
- 110 N/mm
- Rebound position
- Standard 8 (0°), other heights 10 (0°)
- High-speed compression position
- Standard 7, other heights 10
- Low-speed compression position
- 7, low (-25 mm) 10, high (+15 mm) and high (+40 mm) 12
- Spring preload
- 12 mm +12/-3, low (-25 mm) 10 mm +12/-3, high (+15 mm) and high (+40 mm) 15 mm +12/-3
- X-TREME shock absorber with spring
- Hydraulic Preload Adjuster (HPA) with handwheel
KTM
No model found. This product does not fit the model you searched for.