X-TREME + HPA Shock Absorber Yamaha Tenere 700 2025-2026, TracTive
The TracTive X-TREME is a high-quality, fully adjustable shock absorber for the Yamaha Tenere 700, featuring an external reservoir, hydraulic preload adjuster (HPA), and PDSII bottom-out protection.
Rebound and compression damping can be adjusted independently of each other. The compression damping also features separate high- and low-speed adjustments.
With its extra-long external reservoir, the shock absorber holds significantly more oil than a stock unit. This keeps it cooler and maintains consistent damping performance even under heavy loads. The large 46 mm piston offers better damping performance than the smaller piston found in the stock shock.
The handwheel on the hydraulic preload adjuster allows the shock to be quickly adapted to different load conditions without the need for tools.
The shock absorber is also available as the X-TREME model without hydraulic preload adjustment.
Adjustment options
- Rebound: Adjuster at the bottom of the shock
- Low-speed compression: Damping adjustment for slow suspension movements, such as during acceleration or long undulations
- High-speed compression: Damping adjustment for fast suspension movements, such as potholes or harsh off-road bumps
- Spring preload: Hydraulic via handwheel
Technical details
- 46 mm piston diameter
- CNC-machined aluminum body
- External, extra-long reservoir
- PDSII bottom-out protection
- Hydraulic Preload Adjuster (HPA)
- Fully serviceable
PDSII bottom-out protection
The PDSII system utilizes an additional piston that creates progressive damping towards the end of the suspension travel. This reduces harsh bottoming out during heavy impacts or jumps.
Available heights
The shock absorber is available in two different versions:
- Standard height
- 20 mm lowering
For the lowered version, adjustments to the side stand and center stand may be required.
We recommend matching the suspension height on the front and rear wheels. Ideally, the shock absorber should be combined with a correspondingly adjusted fork cartridge.
Individual setup
We configure the shock absorber for your rider weight and intended use before delivery.
For this, we only need your weight including riding gear and a brief note on your primary type of use (road, touring, off-road, etc.).
You can simply send this information to us via email or reply directly to your order confirmation.
The shock absorber comes standard with a 70 N/mm spring. Depending on rider weight and intended use, softer or harder springs are also available.
- Product line
- X-TREME
- Mounting position
- rear
- Adjustable
- Rebound, High-Speed and Low-Speed compression
- Damping system
- Oil and gas separated, with external reservoir
- Bottom-out protection
- PDSII
- Piston diameter
- 46 mm
- Spring preload
- hydraulic, with handwheel
- Spring
- linear
- Factory spring rate
- 70 N/mm
- Rebound (Rebound Position)
- 12 (180°)
- High-speed compression (High Speed Compression Position)
- 10
- Low-speed compression (Low Speed Compression Position)
- 12
- Spring preload (Preload Spring)
- 19 mm +5/-5
- X-TREME shock absorber with spring
- Hydraulic Preload Adjuster (HPA) with handwheel
1 model
Yamaha
Ténéré 7002025-2026
No model found. This product does not fit the model you searched for.
