X-TREME Fork Cartridge Honda XL750 Transalp 2023-2025, TracTive

X-TREME Fork Cartridge Honda XL750 Transalp 2023-2025, TracTive

The TracTive X-TREME is a high-quality, closed cartridge kit for the Honda XL750 Transalp fork, featuring adjustable rebound and compression damping, as well as a hydraulic bump stop.

The two cartridges are inserted into the fork legs without any modifications to the fork. Compression damping is adjusted at the top of the left fork leg, and rebound damping at the top of the right fork leg.

Each cartridge is a closed unit that functions like an independent, pressurized shock absorber with its own damping oil. The large 35 mm piston allows for high oil flow, ensuring stable and highly controllable damping performance.

The cartridges were developed in close cooperation with adventure and rally riders. The result is significantly better off-road handling while maintaining comfort on long-distance trips.

The X-PERIENCE is available as an open cartridge kit with a 26 mm piston.

Adjustment Options

• Compression: top of the left fork leg, 18 clicks
• Rebound: top of the right fork leg, 18 clicks
• Spring preload: on both fork legs, up to 12 mm adjustment range

Technical Details

• 35 mm piston diameter
• Pressurized closed cartridge
• Hydraulic bump stop
• Linear springs and fork oil included
• Bleeder screw in each fork cap
• Fully serviceable and individually tunable

Hydraulic Bump Stop

The hydraulic bump stop acts at the end of the travel, reducing harsh bottoming out during heavy impacts.

Available Heights

The cartridge kit is available in three different versions:

• Standard height
• 25 mm lowering
• 25 mm raising

For the lowered version, an adjustment of the side and center stand may be necessary. For the raised version, an adjustment of the ABS and brake lines may be required.

We recommend matching the suspension height for both the front and rear wheel. Ideally, the cartridge kit should be combined with an appropriately matched shock absorber.

Individual Setup

We will set up the cartridge kit according to your rider weight and intended use before delivery.

For this, we only need your rider weight, including motorcycle gear, and brief information on the primary area of use (road, touring, off-road, etc.).

You can simply send this information to us via email or reply directly to the order confirmation.

The cartridge kit comes standard with 5.6 N/mm springs. Depending on rider weight and intended use, softer or harder springs are also available.